產品說明：最常用的印刷電路板外形加工用銑刀又稱鳳梨刀。具有鑽石目形狀的切刃著重於铣刀使用壽命及排屑效果，適用於單面、雙面或多層等PCB材質外型及開槽的加工。
應用：特別適用於一般FR4、FR-5、BT等基材， 屬於最常使用的標準铣刀。
Description:
The RCF milling cutter is also known as the pineapple knife. It is good for chip removal and provides accurate cutting and long life. It is suitable single-sided, double-sided or multi-layer for ordinary PCB material and slotting processing; it can get a very good board edge finish.
Application:
RCF milling cutters are designed for most general applications on FR-4, FR-5 and BT substrates.
應用：特別適用於一般FR4、FR-5、BT等基材， 屬於最常使用的標準铣刀。
Description:
The RCF milling cutter is also known as the pineapple knife. It is good for chip removal and provides accurate cutting and long life. It is suitable single-sided, double-sided or multi-layer for ordinary PCB material and slotting processing; it can get a very good board edge finish.
Application:
RCF milling cutters are designed for most general applications on FR-4, FR-5 and BT substrates.
|
規格Dimension(mm) |
|
建議切削參數Parameters |
||||
|
刃徑øD Mill Dia |
刃長L Flute length |
|
刀具壽命(m) 粗撈/精修 |
轉速(Krpm) Spindle Speed |
下刀速(m/min) Table Feed |
退刀速(m/min) |
|
0.4 |
3 |
|
x/3 |
48 |
0.4 |
5 |
|
0.5 |
4 |
|
2/3 |
42 |
0.5 |
5 |
|
0.6 |
4 |
|
2/3 |
42 |
0.5 |
5 |
|
0.8 |
6 |
|
2/4 |
40 |
0.5 |
5 |
|
1.0 |
9 |
|
3/6 |
40 |
0.5 |
5 |
|
1.2 |
9 |
|
10/20 |
38 |
0.7 |
5 |
|
1.4 |
9 |
|
10/20 |
35 |
0.7 |
5 |
|
1.5 |
9 |
|
10/20 |
30 |
0.7 |
5 |
|
1.6 |
9 |
|
10/20 |
30 |
0.7 |
5 |
|
1.8 |
9 |
|
15/30 |
30 |
0.9 |
5 |
|
2.0 |
10 |
|
15/30 |
28 |
0.9 |
5 |
|
2.4 |
10 |
|
45 |
25 |
0.5 |
5 |